Plastics can become pliable at high temperatures and brittle at low temperatures: care should be exercised when using close to recommended extremes and the product tested prior to implementation.
Hygiplas cannot accept responsibility for misuse.
Please contact Hygiplas should you be in any doubt about suitability of a product for your application.
Suitable for temps. between -20°C and +80°C
A strong and fairly rigid material with a hard surface, offering excellent shape retention in use. Good chemical resistance (exceptions apply, always check suitability).
Medium Density Polyethylene (MDPE)
Suitable for temps. between -35°C and +70°C
A slightly flexible material, offering excellent shape retention in use, good impact resistance, and particularly suitable for use at lower temperatures.
High Density Polyethylene (HDPE)
Suitable for temps. between -40°C and +80°C
A strong and rigid material, particularly suitable for use at lower temperatures. Lower load bearing properties than Polypropylene, and excellent resistance to stress cracks.
All sizes/capacities are approximate.
As our range is constantly being updated, we cannot accept responsibility for any changes in product specification.
|To Convert||Multiply By||To Convert||Multiply By|
|Inches to centimetres||2.540||Centimetres to inches||0.3937|
|Feet to metres||0.3048||Metres to feet||3.2808|
|Sq inches to sq cm||6.4516||Sq cm to sq inches||0.1550|
|Cu inches to cu cm||16.387||Cu cm to cu inches||0.06102|
|Cu feet to cu metres||0.02832||Cu metres to cu feet||35.31|
|Cu inches to litres||0.01639||Litres to cu inches||610024|
|Gallons to litres||4.546||Litres to Gallons||0.220|
|Ounces to grams||28.35||Grams to ounces||0.03527|
|Pounds to grams||453.59237||Grams to pounds||0.002205|
|Pounds to kilograms||0.4536||Kilograms to pounds||2.20462|
|Tons to kilograms||1016.00||Kilograms to tons||0.0009842|
|Z & P||Zinc and Passavate (Primed, Zinc-plated and clear Passavate sealed)|
|POLYBL||Polyester-baked gloss finish - BLUE|
|POLYGR||Polyester-baked gloss finish - GREEN|